Accurate temperature measurement is essential for maintaining product quality, process efficiency, regulatory compliance and operational safety in industrial processes. High performance, stable temperature sources are the solution for achieving optimal performance of temperature sensors and process instrumentation, by providing reference temperatures for checking and calibrating these devices.
The Druck DryTC 650 dry block calibrator incorporates the latest metal block and electronic control technology and offer a choice of precision bored well inserts to accommodate a wide range of test devices. The DryTC provides high accuracy, excellent set point stability and rapid heating and cooling times.
Dry block calibrators greatly simplify the test and calibration of process sensor heads, probes, switches and thermometers, but optimum performance relies on a good fit of the device in the well insert. To facilitate this, a range of insertion sleeves are available with hole diameters to suit the most common probes and devices.
| Temperature |
|||
| Temperature Range | Ambient to 650°C (Ambient to 1200°F option). | ||
| Display units | °C or °F (optional). | ||
| Heat well | Dia. 28 mm/depth 150 mm. | ||
| Measuring Zone | 0 to 40 mm from the bottom of the insert. | ||
| Stability | 0.05 °C. | ||
| Accuracy | 0.4°C. | ||
| Display Specifications |
|||
| Display | 4-digit, 7-segment LED, 7mm high. | ||
| Two-line display | Reference temperature, Target temperature. red = upper display, green = lower display. |
||
| Display range | 0 to 650°C. | ||
| Measurement resolution | 0.01° from -9.99 to 99.99 otherwise 0.1°C. | ||
| Setting resolution | 0.1°C. | ||
| Standard Features |
|||
| Controller off | / | ||
| Manual control | / | ||
| Operating service hours | / | ||
| Set-point memory | / | ||
| Rate control °C /min | / | ||
| Test profile | / | ||
| General Specifications | |||
| Ambient temperature | 10°C to 50°C (50°F to 122°F). | ||
| Ambient humidity | To 80% rh (non-condensing). | ||
| Storage temperature | From -10°C to 60°C (14°F to 140°F). | ||
| Recommended operating environment | Indoor use. Not for use in potentially explosive atmospheres. | ||
| Supply voltage | 100 to 240 VAC 50/60 Hz. | ||
| Power consumption | 400 VA nominal. | ||
| Compliance | CE marked, EN6326 (EMC), EN61010 Oelectrical safety), EU directive (RoHS, REACH, WEEE). | ||
| Dimensions (W x H x D) | 250 mm x 330 + 68 mm x 270 mm. | ||
| Weight | 7.5 Kg. | ||
| Druck DryTC 650 warranty | One-year. | ||
